This cool console table won’t take much space and is so coastal with its light aqua color! Prepare 1x12x8 white pine, 1x3x8 white pine, pre-made 29″ leg posts- 2.25″ block tops, 1.25″ and 2″ screws, stain or paint (here it’s aqua paint). Using a circular saw cut the 1x12x8 to 60″, then cut the 1x3x8 pieces into two 51″ pieces and two 5.25″ pieces. Lay the top flat on the ground with the bottom side up. Using your cut pieces and legs, mock up where everything should go, using the drawing below. Using the screws, fasten all of the legs and side skirts together, to make the base for your table. Continue reading the tutorial here.