This awesome console table is great for any entryway! Start by building the bases for each of the three shelves. You will use the 1″ x 3″ boards for the bases. The middle and bottom shelf will be the same build. Build two rectangles using two 1″x3″x10.5″ boards & two 1″x48″ boards. Glue every where you will nail for extra strength. You’ll want to sandwich the 10.5″ boards so the rectangle measures approx. 48″x12.25″. The rectangular base for the top shelf will ultimately measure the same as the other shelves – 48″x12.25″ – however you need two additional 10.5″ sandwiched at the 1/3 & 2/3 mark as shown below. Again, glue and nail at all touch points. Continue reading the instructions and the supply list here.