This coffee table is super cool due to its trendy hairpin legs and an amazing wooden pattern on top. To make it you’ll need a drill, a miter saw, a brad nailer, tape measure, a pencil, safety glasses, a torch, 12 – 1 x 2 x 8′ common board; 3/4″ x 48″ x 48″ plywood, 4 – 16″ hairpin legs, wood glue, 1-1/4″ brad nails, 1-1/4″ washer head wood screws. First of all, cut the wood according to the pictures. Then, using 120 grit sand paper sand the rough edges of the wood. Then for the smaller triangle pieces completely torch them. Torching the wood burns away all the softer wood leaving a raised grain. It makes for a really cool texture on the tabletop. Head over to rogueengineer.com to continue reading the tutorial.