With the addition of a sliding tray for keeping office supplies handy, and a built-in fabric bulletin board for posting reminders and inspiration swatches, this chest is sure to be a welcomed addition to any office space. Let’s get started! Using the cut list above, cut the 1 x 2 stiles, rails, and cleats to size. Using a Kreg Jig and bit adjusted to a ¾-inch-depth, drill two pocket-holes in both ends of each stile and cleat. Using a Kreg Jig and bit adjusted to a ¾-inch-depth, drill three pocket-holes along the sides of the front, back and side plywood panels where they’ll connect to the legs. Continue reading the tutorial here.