Sawhorse furniture is now something sweet vintage and rustic-inspired, if you like such type of furniture, let’s realize this project from rogueengineer.com. You’ll need a pocket hole jig, a drill, a miter saw, tape measure, a pencil, safety glasses, 2x – 2 x 8 x 10′ lumber, 3x – 2 x 4 x 96″ premium studs, 2-1/2″ pocket hole screws, 2-1/2″ wood screws. Drill pocket holes and assemble the top using pocket hole screws. Then install legs supports using 2-1/2″ wood screws. Drill pocket holes and install legs using 1/2″ pocket hole screws. To complete the finish on the table stain over top of the torched wood with stain of your choice. Keep reading the tutorial in the source.