Floating picture frames are very stylish and fit any modern interior. To make one you’ll need 4 stand-off bolts, 2 30x36in acrylic sheets, scrap wood, drill, drill bit the same size as stand-off bolt, 4 screws & drywall anchors, 24×30 in engineer print, double sided tape, dry erase marker. Measure where each bolt will go on the first sheet of acrylic. Make a mark with your marker. Drill each hole into acrylic in reverse. After all 4 corners are drilled, lay the first sheet of acrylic on top of the non-drilled piece making sure the sides are lined up. Trace the drilled holes on to the second sheet- making sure it is exact. Drill the new holes on the second sheet of acrylic. Keep reading what to do here.