Using a wine bottle for a bird feeder? Genius! Prepare a drill, a miter saw, a brad nailer, tape measure, a pencil, safety glasses, hearing protection, an empty wine bottle, 1 x 6 x 8′ cedar board, 1 x 2 x 8′ cedar board, 1-1/4″ brad nails, wood glue. Using a jigsaw cut a hole slightly larger than wine bottle diameter. Glue and nail together frame using the brad nails. Drill 2’’ diameter hole in the center of support. Locate support such as that mouth of wine bottle is ½’’ from base. Then check level and nail support in place using 1-1/4’’ brad nails. Continue reading the instructions here.