Need a cool and stylish wardrobe? Here’s an idea! Prepare 2 – 3/4″ x 20″ x 6′ pre-cut pine boards for side panels, 3 – 3/4″ x 20″ x 36″ pre-cut pine boards for top, bottom and center supports, 1 – 3/4″ x 12″ x 6′ pre-cut pine boards for back support panel, 1 – 5′ copper pipe, 25 – #8 x 2″ brass wood screws, 8″ round mirror, a pipe cutter, a power drill, 1″ drill bit, 5/64″ drill bit, a power sander, Phillips screwdriver, a yardstick, a ruler. Sand each piece of wood with your electric sander or regular sandpaper. If you prefer to stain or paint your panels, this is a good time to do that if you don’t mind doing some touch ups at the end. Keep reading what to do here.