With a few pieces of molding and some glue, you can craft these handy card holders for family game night. Add bonus points if the kids decorate and personalize their holder! You’ll need tape measure, a miter saw and hand clamps. Using a handsaw or miter saw, cut the Dividers and ¼-inch hobby board to length. Using the cut list above, miter the Front, Back and Sides pieces to size with opposing 45-degree miters at each end. Apply wood glue to each mitered piece, and then clamp it in place on the Base. The pieces should create a rectangular border on the Base that’s flush with its edges. Read what to do next here.