If you often buy coffee, you can make a coffee holder to personalize your cup. You’ll need 2 fabric scraps, washed and ironed, fabric paint in grass green, freezer paper, a sharp X-Acto knife, a self-healing cutting mat, a small foam paintbrush, 4″ of thin elastic or a hair elastic, a button and thermal lining. Start from printing the template on a piece of 8 1/2 x 11″ freezer paper, making sure to leave the shiny side blank. Print a second template on a piece of plain paper. Take the template on the plain paper and cut it out along the dotted line. Set aside. With the X-Acto knife, cut the grass design out of the freezer paper. I cut further down than the solid line so that the green section would go into the seam. The rest of the tutorial is here, finish the holder and enjoy!