We’ve already told you of a state wall art, and here’s one more idea, no less original and also very cool! You’ll need a piece of wood, 1 x 17 wire brads, white string. So, take your wood piece and cut out the edges of your state, along with the heart & then tape the state cutout in the center of the wood piece and then hammer the 1 x 17 wire brads around the cutout. After hammering the wire brads around the state cutout, then pull off the cutout and place the heart down and do the same as you did for the state cutout. Once that is all done, use white string & just loop from one wire brad to the heart. Enjoy!