Turn a usual piece of mirror into a stylish accessory for your bathroom! So, measure, cut and miter the 1/2” x 2” molding to use as furring strips for the mirror frame. Stain just the outside edges of the furring strips with gel stain. After the gel stain dries, apply a generous zig zag of liquid nails heavy duty adhesive to back of the bottom strip. Position the strip flush to the mirror and wedge a few shims in the gap between the strip and the top of our countertop. Press the furring strip against the wall firmly, and then use some lengths of painter’s tape to be sure the strip stays in place. Continue reading the tutorial here.