Simple And Stylish DIY Wreath Stand

Very Simple Diy Wreath Hanger

If you want to place a wreath not only on your front door, you can make a wreath hanger. You’ll need a couple of blocks of wood, 1 dowel rod that is 16 inches, 1 hook, a plastic bead, 1 button  cap, a couple screws, some black paint, a little silicone glue, a little wood glue. Drill a hole about 1 inch around into the bigger block so you can fit the dowel down inside of it. Add a little wood glue, put the dowel in, then screw through the bottom of the block to hold the down in place. Then add the smaller block, and put two screws – in different places – to keep the blocks together. continue reading the instructions here.

2 of 6
Very Simple Diy Wreath Hanger
3 of 6
Very Simple Diy Wreath Hanger
4 of 6
Very Simple Diy Wreath Hanger
5 of 6
Very Simple Diy Wreath Hanger
6 of 6
Very Simple Diy Wreath Hanger