A nightstand is a necessary thing in every bedroom, even the smallest one. So, how about a rustic DIY nightstand? The supplies are 1 4×8 sheet of 3/4″ hardwood plywood ripped into 16″ boards, 1 – 1 x 2 x 8 pine board, 2 – 1 x 4 x 8 pine board, 1/4″ hardwood plywood for the back. Use a miter saw to make from the 16″ boards 2 sides at 26″ each. You will also have 3 pieces at 20″ each that will be your top, bottom and shelf pieces. Make 3/4″ pocket holes on one side of each of these pieces. Use a bit of wood glue and 1 1/4″ pocket hole screws to attach the shelf pieces to the sides. Read the rest of the tutorial here.