This chic industrial shelf is pretty easy to make! You’ll need 2x4s reclaimed wood, pipe fittings, a cordless drill, a miter saw or jig saw, a palm sander, a stencil, if desired, a stencil brush. Cut 2x4s down to the desired size. Slightly sand the cut edges. Somehow attach the 2x4s together. Metal brackets or a proper jig would work fabulous. Attach pipe fittings to the underside of the shelf. Stencil on a design if desired. Predrill holes on an angle, then insert screws. Add the legs. Here a gate pull and hinge were added, as if perhaps this was a small door off something. Voila!