This wood roll-up tray is a mix of a travel valet tray, a hot food trivet, or a pad to set your laptop on – so functional! To make it you’ll need 4 strips of wood – 1.5″ wide x 1/4″ thick x 36″ long, a saw, a thick piece of felt of your choice, roughly 20 x 15″, wood glue and a rotary cutter. Set your fence at 7/16″ and the blade at 25 degrees. This gives it just a slight chamfer that will add a great finished looked. After you cut the chamfer, chop each strip into 12″ pieces and lay out in a row to check for uniform lengths. Keep reading the instructions in the source.
