DIY Glass Block Nightlight In Wood

Diy Glass Block Nightlight In Wood

This beautiful night light will be ideal for any bedroom, prepare liquid fusion, square glass block, 1×4″ oak board, 1/4×1″ pine lath, 1/2″ diameter PVC x 2 1/4 inches long, 13/16″ wood bit, #8 x 1 1/4″ screws, 1 1/4″ finishing brads, 1/8″ diamond bit & chisel, a sponge and water, cordless drill and candle light bulb light kit, wood stain. There are two options for cutting a hole into your glass block. The first is to use a 1/8″ diamond drill bit, drilling holes in a circle shape. To finish cutting the hole out tap a chisel in between the hole spaces to completely remove the glass from the circular area. Continue reading the instructions here.

2 of 11
Diy Glass Block Nightlight In Wood
3 of 11
Diy Glass Block Nightlight In Wood
4 of 11
Diy Glass Block Nightlight In Wood
5 of 11
Diy Glass Block Nightlight In Wood
6 of 11
Diy Glass Block Nightlight In Wood
7 of 11
Diy Glass Block Nightlight In Wood
8 of 11
Diy Glass Block Nightlight In Wood
9 of 11
Diy Glass Block Nightlight In Wood
10 of 11
Diy Glass Block Nightlight In Wood
11 of 11
Diy Glass Block Nightlight In Wood